Table of Contents
Advertisement
92
Seats and stowage
Adjusting the head restraint electrically
* NOTE Damage to the electrical head
restraint when adjusted manually
If the height of the electrically adjustable
head restraint is adjusted manually, this can
damage the mechanism of the head restraint.
Adjust the height of the electrically
#
adjustable head restraints using the
buttons in the door trim.
Requirements:
The ignition is switched on or the door is
R
open.
To adjust the height: slide the button
#
or down in the direction of the arrow.
To move forwards: pull the head restraint
#
forwards until it engages in the desired posi‐
tion.
To move backwards: press and hold down
#
the release knob
2
restraint backwards to the desired position.
%
If the ignition is not switched on, you can
adjust the head restraint height within 30
seconds of unlocking the vehicle.
1
up
and slide the head
Switching the seat heating on/off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest
padding to become very hot.
In particular, the health of persons with limi‐
ted temperature sensitivity or a limited ability
to react to high temperatures may be affec‐
ted or they may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it is
switched on repeatedly.
* NOTE Damage to the seat heating due to
overheating
The seat heating may overheat if the seat is
unoccupied when the seat heating is
switched on or if objects are placed on the
seat.
Switch off the seat heating when the
#
seat is unoccupied.
Do not place any objects on the seat
#
when the seat is unoccupied.
Requirements
The power supply has been switched on.
R
Front seat
Advertisement
Table of Contents
