2.4.1.1 Safety Instructions; Environmental Protection - GEA VARIVENT TSVN Operating Instruction

•
•
•
•
•
•
•

2.4.1.1 Safety instructions

Dangerous situations during operation can be avoided by safety-conscious and
proactive behaviour of the personnel.
For operation, the following principles apply:
•
•
•
•
•
•
•
2.4.2

Environmental Protection

Harm to the environment can be avoided by safety-conscious and proactive
behaviour of the staff.
For environmental protection the following principles apply:
•
•
•
•
430BAL008565EN_1
21.03.2022
Only use the valve for its intended use.
The valve must be functional and in good working order. Check the condition
of the valve before starting work and at regular intervals.
Wear tight-fitting work clothing for all work on the valve.
Ensure that nobody can get hurt on the parts of the valve.
Immediately report any faults or noticeable changes on the valve to the
person responsible.
Never touch the pipes and the valve when these components are hot! Avoid
opening the valve unless the process plants have been emptied and
depressurised.
Observe the accident prevention regulations and all local regulations.
Monitor the component during operation.
Safety devices must not be changed, removed or taken out of service. Check
all safety devices at regular intervals.
All guards and hoods must be fitted as intended.
The installation location of the component must always be properly ventilated.
Structural changes to the component are not permitted. Report any changes
to the component immediately to the person in charge.
Always keep danger zones clear. Do not leave any objects in the danger
zone. Only allow persons to enter the danger zone when the machine is de-
energized.
Regularly check that all emergency stop devices are working correctly.
Substances harmful to the environment must not be discharged into the
ground or the sewage system.
Always observe the pertinent regulations relating to waste avoidance,
disposal and utilization.
Substances harmful to the environment must be collected and stored in
suitable containers. Clearly mark the containers.
Dispose of lubricants as hazardous waste.
General safety instructions and dangers
Safety
11