Transport And Storage; Transport And Storage Information; Dismantling And Packing - OCULUS ImageCam 3 Instruction Manual

15 Transport and Storage

15.1 Transport and Storage Information

15.2 Dismantling and Packing

Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
The ImageCam® 3, must be properly dismantled and packed before being
transported or stored.
Storage conditions
Ambient temperature
Relative humidity, including condensation
Air pressure range
Transport conditions
Ambient temperature range
Relative humidity, including condensation
Air pressure range

Wait approx. 3-4 hours after transport before putting the
ImageCam® 3 into initial operation. Extreme temperature changes
from cold areas to warm rooms can cause condensation on the
optical components.

End the current session.
Attention
Risk of equipment damage due to incorrect shipment

Avoid shocks, vibrations, and contamination.

Transport the ImageCam® 3 carefully. Avoid shocks and vibration.
Attention
Risk of equipment damage from improper storage

Avoid contamination, high temperatures and humidity.

Avoid shocks, vibrations,
ImageCam® 3 in accordance with the specified storage conditions.

Avoid placing near heaters and moisture.
15 Transport and Storage
-10 — +55°C
20% — 80 %
700 hPa — 1060 hPA
-10 — +55°C
20% — 80 %
700 hPa — 1060 hPA
and contamination. Store the
61 / 68