Capturing An Image Or Recording A Video - OCULUS ImageCam 3 Instruction Manual

10 Capturing an Image or Recording a Video

Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
10 Capturing an Image or Recording a Video

Situate the patient so that he/she is sitting comfortably.

Use the slit lamp in accordance with the instructions given in the
supplied user manual for the slit lamp.
Different image-capture screens are opened, depending on which camera
is connected. The operating concept is, however, virtually the same.
Possible image sources: USB camera, IEEE1394 FireWire
The image-capture screens for the USB camera are documented below.

If the overview screen is open:
Select whether the left or the right eye is to be captured:
for the right eye

 for the left eye
The Image screen opens:
Fig. 10-1: ImageCam® 3 image window

If you want to take lenghts or angles in the image later, select the
magnification that you are using for the image capture,
page 15.

To do this, press the button or 5x, 8x, 12,5x, 20x, 32x.
sect. 9.3.1,
23 / 68