Starting The Imagecam® 3 Programme - OCULUS ImageCam 3 Instruction Manual


In the list that appears, click the entry you were searching for to transfer the
patient's name to the patient window. This also brings up a list of any previous
examinations for that patient in the examination window (bottom right side).
Extended Patient Search: [Extended] check box

Click on the [Extended] check box.
The screen displays additional search parameters which reference previous
examinations, for example.
Fig. 9-4: Extended search

Enter a search parameter.
The patient in question is highlighted in the list.

Press the [Quit search] button.

Proceed in the same way as you would when inputting a patient name.
9.2 Starting the ImageCam® 3 Programme
Transition Patient Data Management => ImageCam® 3 Programme

After selecting a patient: Press the [Imagecam] button to start the ImageCam® 3
programme.
or

Double-click the selected patient name to start the ImageCam® 3 programme.
Instruction Manual ImageCam® 3 (G/70750/1111/de)
9 Preparing for Capturing Images
13 / 68