Select Exposure Programme - OCULUS ImageCam 3 Instruction Manual

9 Preparing for Capturing Images
9.3.2

Select Exposure Programme

16 / 68
Every time the image capture / camera window is opened, the zoom that
has been set as the standard or default value is now pre-defined.
Fig. 9-7: Zooms set as default settings.
Settings that relate to the quality of the image are saved in an exposure
programme.
Use Shortcut to Select an Exposure Programme
An exposure programme enables you to quickly re-access already set
image capture parameters. OCULUS has pre-set four exposure
programmes, which can be opened via the shortcut; you can define
another four as needed sect. 9.3.5, page

Select an exposure programme:
1 Pre-set exposure programmes
2 User-defined exposure programmes
Fig. 9-8: Shortcut to "Exposure programmes"
The respective exposure programme is displayed. If necessary, you
can adjust the white balance,
Select an Exposure Programme from the Drop-Down List.
You can choose various pre-set image capture parameters with the
exposure programmes. You can save any number of configurations,
sect. 9.3.5, page 21.
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
21.
1
2
sect. 9.3.3, page 17.