Edit Image - OCULUS ImageCam 3 Instruction Manual

11.7 Edit Image

Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
You can edit an image at any later time.

ImageCam® 3 programme > Edit > Image-settings
The following window is displayed (example):

Change the parameters as needed:
Brightness

Contrast

Image sharpness

RGB to BGR: Change colour space

You can change the colour space, e.g. to let you view blood vessels
at a high contrast. The red areas are shown in blue and vice-versa.
Green remains the same. All changes effect only the viewer, the
original image was not be changed.
11 Viewing the Images
35 / 68