Select Slit Lamp Magnification - OCULUS ImageCam 3 Instruction Manual

1 Menu bar
2 Shortcut to exposure programmes
3 Drop-down list "Exposure programmes"
4 [Delete] button
Fig. 9-6: ImageCam® 3 programme operation
9.3.1

Select Slit Lamp Magnification

Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)

Press the button for the right eye, or
The Image screen opens:
5 [Save] button
6 [Settings] button
7 Camera image
The menu bar shows the magnifications that are available on your slit
lamp. If you want to identify lengths in the images later, the selected
optical magnification of the slit lamp must be known.

Select the magnification that you will be using for the image
capture.
This information is saved together with the image and the correct
calibration for the according tool will be used when identifying
lengths. You can set the magnification/zoom that you use most as a
default setting.

Click the right mouse button.
The following is displayed:

Press this button to set the zoom factor as the standard or default
setting.
9 Preparing for Capturing Images
for the left eye.
7
1
2
3
4
5
6
15 / 68