Misc"6 Tab; Tab Panels "Hecht" And "Dicom - OCULUS ImageCam 3 Instruction Manual

12 Patient Data Management
12.5.7

"Misc"6 Tab

12.5.8

Tab Panels "Hecht" and "DICOM"

58 / 68
1
2
1 check box for managing a database
Fig. 12-13: "Misc" tab
Patient Data Management is implemented in two different versions: V2.x
and V6.x. In principle, implementing both versions on the same network
should be avoided. In any case, if the higher technical requirements of the
new version V6.x cannot be circumvented, then the corresponding
settings must be specified on this tab.

Activate the check box on this tab (1) on just one PC with an
installed V6.x version.

Make sure that this check box is not active on any other PC which
has version V6.x of the Patient Data Management user interface
installed.

Activate the check box (2) to re-initialise the data in the database
on next startup.
This ensures that the database is automatically adjusted if a patient is
entered on another PC on with the older Patient Data Management V2.x
is installed.
The group box "IPad Report" has no function at present.
The tab panels "Hecht" and "DICOM" have no function at present.
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
2 check box for initialising in a
database