Email" Tab - OCULUS ImageCam 3 Instruction Manual

12.5.4

"Email" Tab

Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
1
2
3
1 Selection of the email connection
2 Standard text for subject and body text
Fig. 12-10: "Email" tab
The three radio buttons in the top section of the tab panel (1) are used to
select whether the email connection is activated, and if so, how the data
transfer is to take place.

Activate the option "MAPI" if an email programme (e.g. Microsoft
Outlook) is installed on your PC and if the data should be sent using
this programme.

Activate the option "SMTP" if no email programme is installed on
your PC but you would still like to send the data via email. In this
case, additional entries are necessary in the "SMTP" group box.
"Default text" Group Box

Enter the text in the "Subject" and "Body" (2) boxes which should
normally be pre-entered when email is sent. You can edit this text
before email is actually sent (e.g. particular to patients or
examinations).
"SMTP" Group Box
In case no email programme is installed on the computer, several entries
must be made here to send emails.

Contact your system administrator if you have questions about the
individual entries.
12 Patient Data Management
3 SMTP connection selection
55 / 68