Entering A New Patient; Selecting An Existing Patient - OCULUS ImageCam 3 Instruction Manual

9 Preparing for Capturing Images
9.1.1

Entering a New Patient

9.1.2

Selecting an Existing Patient

12 / 68
To start the ImageCam® 3 programme, first enter a new patient (8) or
select an existing patient from the list of patients (7).
For more information on Patient Data Management, refer to the
page 43.

Press the [New] button to enter a new patient in the Patient Data
Management system.

Enter the patient's last name, first name and date of birth in the
patient window.
Fig. 9-2: Entering patients
Optionally you can enter an ID number for the patient.

To save the data you entered, click [Save].
The patient you have just entered now appears in the patient list.
The patient data list on the left-hand side of the screen displays all
previously examined patients in alphabetical order.
Fig. 9-3: Patient list

Choose [Search] to quickly find the patient you are looking for in the
list.

Enter the patient's name or the first letter of the name in the "Last
name" field.
Alternatively, you can search for the patient using an ID number,
first name or date of birth, assuming that one was assigned when the
patient was first recorded.
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
sect. 12,