Electrical Safety; Touch Screen - Raven RS1 Installation Manual

For fendt 200 vfp varioguide (with fendt one, model year 2021)

Hide thumbs Also See for RS1:

Table of Contents

CHAPTER 1

ELECTRICAL SAFETY

• Always verify that power leads are connected to the correct polarity as marked. Reversing the power leads

could cause severe damage to the Raven system or other components.

• To prevent personal injury or fire, replace defective or blown fuses with only fuses of the same type and

amperage.

• Do not connect the power leads to the battery until all system components are mounted and all electrical

connections are completed.

• Always start the machine before initializing this Raven system to prevent power surges or peak voltage.

• To avoid tripping and entanglement hazards, route cables and harnesses away from walkways, steps, grab bars,

and other areas used by the operator or service personnel when operating or servicing the equipment.

• Only touch the touch-screen with your finger or by using a special touch-screen stylus/pen. Operating the

touch-screen with sharp objects may cause permanent damage to the screen.

• Only clean the screen using a damp cloth. Never use caustic or other aggressive substances.

RS1™ Installation Manual for Fendt 200 VFP Varioguide (with Fendt One, Model Year 2021)

CAUTION

Table of Contents