Memory Configuration - DTK PAM-0075I User Manual

High performance pentium pci atx mainboard

Table of Contents

2.12 MEMORY CONFIGURATION

The mainboard lets user upgrade system memory via SIMM and DIMM sockets on the

mainboard.

Four SIMM sockets (SIMM1, SIMM2, SIMM3, SIMM4) are provided for SPM, FPM

and EDO RAM SIMM and two DIMM sockets (DIMM1, DIMM2) are available for the

SDRAM or 3.3V EDO DIMM.

Note:

The type of SIMM1/SIMM2 must be same.

The type of SIMM3/SIMM4 must be same.

SIMM1/SIMM2 and DIMM1 cannot co-exist.

SIMM3/SIMM4 and DIMM2 cannot co-exist.

Table 1 provides some typical memory configuration supported by the mainboard.

Onboard memory is located in two banks:

Bank 0: SIMM1 & SIMM2

DIMM1

Bank 1: SIMM3 & SIMM4

DIMM2

The total memory size is 4 -256MB and various configuration of DRAM types in the

following table are for reference:

(SIMM 1,2/DIMM1)

Bank 0

Single

None

Single

Double

None

Double

Table 1

Jumper Settings

Bank 1

(SIMM 3,4/DIMM2)

None

Single

Double

Single

None

Double

Table of Contents