Table of Contents
Advertisement
4.
Insert the Heatsink Top Support to the Pentium II Heatsink and the Heatsink Support Base
as the following diagram:
2.8
MEMORY CONFIGURATION
The Mainboard lets user upgrade system memory via SIMM sockets on the mainboard.
On-board memory is located in three banks: Bank 0, Bank 1, Bank 2 and Bank 3.
Two SIMM sockets are provided in each bank. User can install either 4M, 8M, 16M,
32M or 64M SIMM in each bank. Maximum memory size of system can be 512MB.
Note:
The type of SIMM1/SIMM2 must be same.
The type of SIMM3/SIMM4 must be same.
The type of SIMM5/SIMM6 must be same.
The type of SIMM7/SIMM8 must be same.
Fig. 11
Jumper Settings
13
Advertisement
Table of Contents
