Chapter 6
6.3
RUNNING THE PROGRAM
6.3.1 INSTALLATION
There is no special installation program. You may run the program ZVHDD.EXE from
your hard drive or from a diskette.
When you install ZVHDD, it creates either a binary file or a hard drive partition as you
select, in which to store a saved session.
Note:
If you plan to store session data in a separate partition, create a bootable
diskette and run ZVHDD from the bootable diskette, because partitioning
the hard drive may destroy all existing data on the drive.
To install the program, type the following at the DOS prompt.
ZVHDD/C /file /M:memory_size
ZVHDD/C /partition/M:memory_size
where
/C
/file
/partition
Note:
/M:memory_size
58
OR
Creates a file or a disk partition for session data storage
Specifies a storage file name SAVE2DSK.BIN. This is a
hidden file.
Specifies a disk partition for storage of session data.
Creating a disk partition may cause loss of existing data on the
hard drive. We recommend this method only for new systems
with no data on the hard drive.
Specifies a number from 1 to 256 to select the size in
megabytes of the file or partition.