Memory Configuration - DTK PAM-0057V User Manual

2.10 MEMORY CONFIGURATION

The mainboard lets user upgrade system memory via SIMM or DIMM sockets on the
mainboard. On board memory is located in six banks: Bank 0 -Bank 5. Two SIMM
sockets (SIM1, SIM2) are provided for SPM, FPM and EDO RAM SIMM and two
DIMM sockets (DIMM1, DIMM2) are available for the 3.3V unbuffered SDRAM
and EDO DIMM.
Remarks: The type of SIM1 and SIM2 must be same.
Only 3.3V unbuffered DIMM can be used.
Both single sided and double sided SIMM or DIMM can be supported.
Table 6 provide the typical memory configurations supported by the mainboard.
Bank 0/1
(DIMM1)
Installed
None
Installed
None
Installed
None
Installed
The memory size of SIMM can be 8MB, 16MB, 32MB or 64MB. The memory of
DIMM can be 8MB, 16MB, 32MB, 64MB or 128MB.
Note: Please notice that only 16M bit SDRAM type DIMM is allowed to work
with SIMM.
Bank 2/3 Bank 4.5
(DIMM2) (SIM1/2)
None None
Installed None
Installed None
None Installed
None Installed
Installed Installed
Installed Installed
Table 2
Jumpe r Settings
17