Power Management Setup Menu - DTK PAM-0075I User Manual

Chapter 4
Memory Hole At 15M-16M: Choose Enabled or Disabled. "Enabled" allows some linear VGA
cards to run larger frame port, or it can be reserved for some operating system.
PCI 2.1 Compliance: Select Enabled to support compliance with PCI specification version 2.1.
The chipset has an embedded 32-bit posted write-buffer to support delay transactions cycles.
4.5

POWER MANAGEMENT SETUP MENU

The Power Management Setup option is used to change the values of the chipset
registers for system power management functions.
Power Management
PM Control by APM
Video Off Method
Video off After
MODEM Use IRQ
Suspend Mode
HDD Power Down
Suspend Mode Option
VGA Active Monitor
Soft-Off by PWR-BTTN
Resume by Ring
IRQ 8 Break Suspend
A short description of the screen items follows:
Power Management: Available selection are "Disabled", "User Define", "Max Saving" and "Min
Saving":
"Disabled" will disable all the power saving functions.
"User Define" makes the time period waiting for Suspend Mode to be programmed.
"Max Saving" will set the time period waiting for Suspend Mode to be 1 minute.
"Min Saving" will set the time period waiting for Suspend Mode to be 1 hour.
36
ROM PCI/ISA BIOS (2A59ID1G)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: User Define
: Yes IRQ [3-8, 9-15], NMI
: V/H SYNC+Blank Primary IDE 0
: Suspend Primary IDE 1
: 3 Secondary IDE 0
: Disabled Secondary IDE 1
: Disabled Floppy Disk
: PowerOn Suspend Serial Port
: Enabled Parallel Port
: Delay 4 Sec.
: Enabled
: Disabled
ESC: Quit
F1: Help
F5: Old Values
F7: Load Setup Defaults
Fig. 24
** Reload Global Timer Events **
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
? ? ? ? ? ? : Select Item
PU/PD/+/-: Modify
(Shift)F2: Color