DTK PAM-0075I User Manual page 39

Award BIOS Setup Guide
Boot Sequence: With the default setting the BIOS first attempts to boot from drive A: and then, if
unsuccessful, from hard disk C:. User can select other boot up sequence. Available sequences are
"A,C", "C,A", "C,CDROM,A", "CDROM,C,A", "C only", "LS120,C".
Swap Floppy Drive: Choose Enabled or Disabled. This option lets end users to change the Drive
A: or B: to others.
Boot Up NumLock Status: Choose On or Off. On puts numeric keypad in Num Lock mode at
boot-up. Off puts numeric keypad in arrow key mode at boot-up.
Boot Up System Speed: Choose High or Low. Set the CPU timing at Boot Up, the default is high.
Gate A20 Option: Choose Fast (chipset handled) or Normal (keyboard handled). The gate A20 is
a device used to address memory above 1Mbytes. Initially, the gate A20 was handled via a pin on
the keyboard. Today, while keyboards still provide this support, it is more common, and much faster,
for the system chipset to provide support for gate A20.
Typematic Rate Setting: Choose Enabled or Disabled. Enabled will determines the typematic
rate defined by following two options.
Typematic Rate (Chars/Sec): The number selected 6,8,10... indicates how fast the number of
characters can response in one second.
Typematic Delay (Msec): The number selected indicates the time period between two identical
keys appear.
Security Option: Choose Setup or System. If system is selected, the password should be set.
PCI/VGA Palette Snoop: Select Disabled or Enabled. If Enabled the MPEG Card can
synchronised with PCI/VGA.
OS Select For DRAM > 64MB: Select Disabled or Enabled. If the system memory is larger
than 64MB and running OS/2, please enable this item. However, if it use other operating system,
please disable this feature. Furthermore, if the system memory is less than 64MB, the BIOS will
ignore this function.
Video BIOS Shadow: ROM Shadow copies Video BIOS code from slower ROM to faster RAM.
Video BIOS can then execute from RAM.
C8000-CFFFF Shadow: If enabled and BIOS is present in this segment, then the BIOS is
shadowed.
D0000-DFFFF Shadow: If enabled and BIOS is present in this segment, then the BIOS is
shadowed.
33