Table of Contents
Advertisement
1.5 Product Specifications
WGS-804HPT / WGS-4215-8P2S / WGS-4215-16P2S
Product
Hardware Specifications
Copper Ports
SFP/mini-GBIC Slots
PoE Inject Port
Switch Architecture
Switch Fabric
Switch Throughput@64 bytes
MAC Address Table
Shared Data Buffer
Flow Control
Jumbo Frame
Reset Button
Power LED
PoE Port
PoE Power
Usage LED
LED
LAN Port
Fiber Port
Connector
Power Requirements
WGS-804HPT
8-Port 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X ports
---
4-Port with 802.3af / 802.3at
PoE injector function (Port-1
to Port-4)
Store-and-Forward
16Gbps/non-blocking
11.9Mpps @64 bytes
8K entries
4.1 megabits
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
10 Kbytes
< 5 sec: System reboot
> 5 sec: Factory default
Power (Green)
PoE-in-Use (Amber)
LNK/ACT (Green)
30W, 60W, 90W, 120W
(Green)
10/100/1000BASE-TX Port
(Port-5 to Port-8):
-
1000 (Green)
-
LNK/ACT (Green)
N/A
Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
DC power jack with 2.1mm central pole
48~54V DC, 3A (max.)
22
User's Manual of WGS Managed Series
WGS-4215-8P2S
8 x 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X
ports
2 x 100/1000BASE-X SFP interfaces
Supports 100/1000Mbps dual mode and DDM
8-Port with 802.3af /
802.3at PoE injector
function (Port-1 to Port-8)
20Gbps/non-blocking
14.8Mpps @64 bytes
Power (Green)
PoE-in-Use (Amber)
LNK/ACT (Green)
N/A
N/A
1000 LNK/ACT (Green)
48~54V DC, 5A (max.)
Note: The two power input
interfaces don't support
power redundant
function.
WGS-4215-16P2S
16 x 10/100/1000BASE-T
RJ45 auto-MDI/MDI-X
ports
16-Port with 802.3af /
802.3at PoE injector
function (Port-1 to Port-8)
36Gbps/non-blocking
26.78Mpps @64 bytes
PoE-in-Use (Amber)
LNK/ACT (Green)
60W, 120W, 180W, 240W
(Amber)
N/A
100 LNK/ACT (Amber)
48~54V DC, 5.8A (max.)
Note: The two power input
interfaces don't support
power redundant
function.
Advertisement
Table of Contents
