The page includes the following fields:
Object
• Port Select
•
Priority
•
Timeout
Buttons
: Click to apply changes.
The page includes the following fields:
Object
• Port Name
•
Priority
•
Timeout
Description
Select port number from this drop-down list to set LACP port setting.
The Priority controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this device,
then this parameter will control which ports will be active and which ports will be
in a backup role.
Lower number means greater priority.
The Timeout controls the period between BPDU transmissions.
Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending an LACP packet.
Figure 4-4-11 LACP Port Information Page Screenshot
Description
The switch port number of the logical port
Display the current LACP priority parameter
Display the current timeout parameter
137
User's Manual of WGS Managed Series