The page includes the following fields:
Object
• LLDP Enable
• LLDP PDU Disable
Action
• Transmission Interval
• Holdtime Multiplier
• Reinitialization Delay
• Transmit Delay
•
LLDP-MED Fast Start
Repeat Count
4.10.3 LLDP Port Setting
Use the LLDP Port Setting to specify the message attributes for individual interfaces, including whether messages are
transmitted, received, or both transmitted and received. The LLDP Port Configuration and Status screens in
Figure 4-10-4
appear.
Figure 4-10-3 LLDP Port Configuration and Optional TLVs Selection Page Screenshot
The page includes the following fields:
Object
• Port Select
• State
Description
Display the current LLDP status
Display the current LLDP PDU disable action
Display the current transmission interval
Display the current holdtime multiplier
Display the current reinitialization delay
Display the current transmit delay
Display the current LLDP-MED Fast Start Repeat Count
Description
Select port from this drop-down list
Enables LLDP messages transmit and receive modes for LLDP Protocol Data
Units. Options:
223
User's Manual of WGS Managed Series
Figure 4-10-3
&