Led Indications - Planet WGS-4215 Series User Manual

■ Reset Button
On the left of the front panel, the reset button is designed to reboot the Managed Switch without turning off and on the
power. The following is the summary table of reset button functions:
Reset Button Pressed and Released
< 5 sec: System Reboot
> 5 sec: Factory Default

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; it helps monitor and troubleshoot
when needed. Figure 2-1-2a~2-1-2d
WGS-804HPT LED Indication
Function
Reboot the Managed Switch.
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings shown below:
。
Default username: admin
。
Default password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default gateway: 192.168.0.254
show the LED indications of these Managed Switches.
Figure 2-1-2a WGS-804HPT LED Panel
34
User's Manual of WGS Managed Series