Switching On The Measuring Device; Setting The Operating Language; Configuring The Measuring Device - Endress+Hauser Proline Promass F 200 Brief Operating Instructions

Commissioning
10.2

Switching on the measuring device

After a successful function check, switch on the measuring device.
After a successful startup, the local display switches automatically from the startup display to
the operational display.
If nothing appears on the local display or a diagnostic message is displayed, refer to the
device' s operating instructions which can be found on the CD-ROM supplied with the
device.
10.3

Setting the operating language

Factory setting: English or ordered local language
X X X X X X X X
XX
 9 Using the example of the local display
10.4

Configuring the measuring device

The Setup menu and its guided wizards enable fast commissioning of the measuring device.
The wizards systematically guide the user through all the parameters required for
configuration, such as parameters for measurement or outputs.
44
X
20.50
XX
Main menu
Language
Operation
Setup
Language
English
Ã
Deutsch
Español
Français
0104-1
English
0104-1
Language
à English
Deutsch
Español
Français
Hauptmenü
Sprache
Betrieb
Setup
Proline Promass F 200
0104-1
0104-1
Deutsch
A0013996
Endress+Hauser