Defining The Tag Name; Protecting Settings From Unauthorized Access - Endress+Hauser Proline Promass F 200 Brief Operating Instructions

Proline Promass F 200
Wizard
Select medium
Current output 1
Current output 2
Pulse/frequency/switch output
Display
Output conditioning
Low flow cut off
Partial filled pipe detection
10.5

Defining the tag name

To enable fast identification of the measuring point within the system, you can enter a unique
designation using the Device tag parameter and thus change the factory setting.
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter
Device tag
10.6

Protecting settings from unauthorized access

The following options exist for protecting the configuration of the measuring device from
unintentional modification after commissioning:
• Write protection via access code (→  45)
• Write protection via write protection switch (→  46)
• Write protection via keypad lock (→  40)
10.6.1 Write protection via access code
With the customer-specific access code, the parameters for the measuring device
configuration are write-protected and their values can no longer be changed via local
operation.
Navigation
"Setup" menu → Advanced setup → Administration → Def. access code
Structure of the submenu
Define access code
Endress+Hauser
Description
Enter tag for measuring
point.
→ Define access code
Confirm access code
Meaning
Defining the medium
Configuring output 1
Configuring output 2
Configuring the selected output type
Configuring the measured value display
Defining the output conditioning
Configuring the low flow cut off
Configuring the monitoring of partial and empty pipe
detection
User entry
Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /).
Commissioning
Factory setting
Promass
45