Endress+Hauser Proline Promass F 200 Brief Operating Instructions page 36

Operation options
8.2.1 Operational display
Status area
Status signals
A0013956
Failure
Diagnostic behavior
A0013961
Alarm
Display area
Measured variables
Symbol Meaning
Mass flow
A0013710
• Volume flow
• Corrected volume flow
A0013711
• Density
• Reference density
A0013946
Temperature
A0013947
Totalizer
A0013943
Output
A0013945
Symbols for measurement channel numbers
Measurement channel 1 to 4
A0016325
The measurement channel number is displayed only if more than one channel is present for the same measured
variable type (e.g. Totalizer 1 to 3).
Symbols for diagnostic behavior
The diagnostic behavior pertains to a diagnostic event that is relevant to the displayed measured variable.
For more information about the symbols, refer to the "Status area" section (→  36)
36
A0013959
Function check
A0013962
Warning
The measurement channel number indicates which of the three totalizers is displayed.
The measurement channel number indicates which of the two current outputs is
displayed.
A0013958
Out of specification
Locking
A0013963
Device locked
Proline Promass F 200
A0013957
Maintenance required
Communication
A0013965
Remote operation enabled
Endress+Hauser