Delete the current array
On the UltraTrak front control panel, press SEL to mark View Status.
1.
Press
to mark Configuration, then press SEL.
2.
Type in your password and press SEL.
3.
Press SEL again to select Configure Array.
4.
Press
three times to mark Delete Array, then press SEL.
5.
Press
until you come to the Array you want to delete, then press SEL.
6.
At the confirmation screen, press SEL to delete the selected array. Or press EXIT to
7.
cancel the deletion.
When the LCD shown that the array has been deleted, press EXIT.
8.
Offline Array Recovery Procedures—SuperTrak SX6000 and UltraTrak, Version 5a
32 of 34