Case 6: Array goes
Reboot the UltraTrak or SuperTrak PC. Array status should be
1.
If the array status is still
2.
(UltraTrak) or connected (SuperTrak) in their original order.
If the array status is still
3.
Procedure on page 23, or UltraTrak Recovery Procedure on page 29, for step-by-step
instructions.
Offline Array Recovery Procedures—SuperTrak SX6000 and UltraTrak, Version 5a
for an unknown reason.
OFFLINE
, make sure all the disks are in the cabinet
OFFLINE
, refer to the sections SuperTrak BIOS Recovery
OFFLINE
22 of 34
.
FUNCTIONAL