Install - Midea CCM-270A/WS Service Manual

CCM-270A/WS

8 Install

Under this function, we can install the units into the CCM-270A/WS. There are two options available for installing the units
that is the "Auto topo" and "Manual topo". The difference between the two topologies have been discussed already in the
Installation & Commissioning part of this manual in detail.
No
1 This is to select whether to install the units with auto topology or manual topology.
This refers to the port number of the CCM-270A/WS. The corresponding unit's information is shown in the right side
2 of the display. Also attached in the bracket is the number of units (indoor and outdoor unit both) which are present
in that particular XYE port of the CCM-270A/WS.
3 This displays the system number for respective unit.
4 This displays the address of the unit.
This displays the code of the outdoor/indoor unit. The details about the code of the unit have been given in the
5
"Control" part of this manual.
6 This displays the name for the respective indoor/outdoor unit.
This displays the power rating of the unit. The user needs to put this value by himself for the respective unit by
7 referring the Technical/Service manual of that unit. This will be used to calculate the power consumed by the indoor
unit for the "ECS" function.
This displays the power rating of the electric heater of the unit. The user needs to put this value by himself for the
8 respective unit by referring the Technical/Service manual of that unit. This will be used to calculate the power
consumed by the indoor unit for the "ECS" function.
9 This is to manage and create the groups .
10 Clicking on this will save all the settings that have been edited.
90
Description
201807