Booting Up Of Ccm-270A/Ws - Midea CCM-270A/WS Service Manual

CCM-270A/WS

1.10 Booting Up of CCM-270A/WS

You would successfully land to the boot screen of CCM-270A/WS device, if the power is being received properly by the
centralized controller.
Important Points:
1. Without the power button, the equipment gets started, once it is fully energized.
2. It takes about 1 minute to start the CCM-270A/WS. Before that, there is a black screen for 30 seconds.
3. If the equipment does not get started after some time, you need to check the red colored system lightings inside the
back panel of the CCM-270A/WS are blinking or not. If not, it means that the equipment is not energized. Check the
power supply and wiring. If the system lightings are blinking and the screen stays black for a long time, disassemble
the controller to check whether the screen wiring has got loose.
36
(System Lightings)
201807