Midea CCM-270A/WS Service Manual page 78

CCM-270A/WS
6.1.2 Procedure
1. Tap the selected device to go to the device selections page.
2. Details of the device page are as follows:
No
Devices waiting to be selected are displayed in the rightmost area, and these are the devices that have not been
1
added to the selected subgroup. "1" is a selected device and its top right corner is marked with
2" is a device that has not been selected. Tap the unselected device to select the device. Tap again to deselect the
"
2
selected device.
Tap to activate "Select All".
3 the group are selected. Tap again to deselect all. Manually cancel the selected status of a few devices after "Select
All" has been activated. Will not cancel "Select All". Tap
4 Tap to add the selected device.
Displays the device that has been added. You can tap to select this operation. "5" is a device that has not been
5
selected, tap to select it.
Displays the device that has been added. You can tap to select this operation. "6" is a selected device, tap to
6
deselect it. Left of the selected device is marked with
Tap to activate "Select All".
7 group are selected. Tap again to deselect all. Manually cancel the selected status of a few devices after "Select All"
has been activated. Will not cancel "Select All". Tap
8 Move the device that has been selected to be added to the group out of the "Add Device" queue.
9 Exit without Saving.
10 Save and Exit.
78
Function
is an active status. After activation, all the devices waiting to be selected in
again to cancel the "Select All" option.
.
is an active status. After activation, all the devices waiting to be selected in the
again to cancel the "Select All" option.
201807