Network Connections - Midea CCM-270A/WS Service Manual

CCM-270A/WS
For Power Indication: Look at the back side of the CCM-270A/WS gateway device and check whether the red colored
system lightings are blinking inside the back panel of the device. If the LEDs are blinking, it means power is being received
by the CCM-270A/WS gateway device.

1.6 Network Connections

Insert the network cable to the LAN port. There can be different ways of connecting with the network that is by a LAN
cable or by router (in case more than one IMMP-M or CCM270A/WS are being used for the IMMPRO system.) The details
about this part have been discussed in the pre installation settings in detail.
(Highlighted is the LAN port of CCM-270A/WS)
28 201807