Ecs Settings - Midea CCM-270A/WS Service Manual

1

9.9 ECS Settings

For Touch Screen & Computer Website: This function is same for both.
This kind of setting is related to the energy consumption statistics function of the CCM-270A/WS. The various functions
under this have been described as below:
No
1 It is to set the price of one unit for the electricity consumption.
FTP stands for File Transfer Protocol. This value is the same as the IP address of the computer. It is used to exchange
2
information between IMMPRO software and CCM-270A/WS
3 It shows the version of the software of CCM-270A/WS
It is to select whether the standby power of the outdoor unit will be distributed in the indoor units running power
4 of that particular system only or the standby power of all the outdoor units would be evenly distributed to all the
operating indoor units irrespective of their system
Selecting this, it will also add the power consumed by the IDU. The power consumed here would be added on the
5
basis of the power rating of the IDU and electric heater written in the Edit page of the Install menu.
6 This is to select the display pattern in Energy Statistics document of "Report" function.
201807
Function
CCM-270A/WS
119