Flow Chart For Ccm-270A/Ws Computer Website - Midea CCM-270A/WS Service Manual

1

2.2 Flow Chart for CCM-270A/WS Computer Website

Below is a flow chart of check points that need to be kept in mind while installing the CCM-270A/WS for computer
website.
Process
Connect the IDU and ODU
with each other
Connect the Power cable
to CCM-270A/WS
Connect the LAN cable
IP Settings
Auto Addressing & ENC4
Settings
Provide the power
Login the CCM-270A/WS
Install the IDUs & Check
results
Set Normal user account
Connect the power meter
1
The ENC4 settings are required to distinguish several ODUs from different system from each other.
201807
Check Point
Refer to the IDU and ODU respective installation manuals.
The power cable is not supplied with the CCM-270A/WS. The
user needs to purchase a power adaptor of 24VAC, current
1000mA himself.
If it is connected directly to the computer, it is simply
required to connect a LAN cable with computer.
Details discussed in 1.6 Network Connections.
The ODU needs to be set to auto addressing.
It will take atleast one minute to reach the user login
interface from the boot screen.
The first login needs to be from administrator account,
Username: admin
Details discussed in 1.11 Login and 1.12 Install the IDUs.
An account with lesser permissions for the end user.
Details discussed in 1.13 Check the Installation Resuts
If the ECS function is required to be used, connect the power
meter. Details discussed in 1.15 Energy Meter Installation
CCM-270A/WS
1
Password: 1
45