General; Safety Precautions - Midea CCM-270A/WS Service Manual

CCM-270A/WS

1 General

1.1 Safety Precautions

Read these safety precautions carefully before installing the CCM-270A/WS.
After completing the installation, make sure that the power supply and CCM-270A/WS operate properly during the startup
operation.
General
NOTICE
Improper installation or attachment of equipment or accessories could result in electric shock, short-circuit,
leaks, fire or other damage to the equipment. Only use accessories, optional equipment and spare parts
made or approved by Midea.
WARNING
Make sure installation, testing and applied materials comply with the applicable legislation.
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses etc.) while installing,
maintaining or servicing the system.
WARNING
Tear apart and throw away plastic packaging bags so that nobody, especially children, can play with them.
Possible risk: suffocation.
Installation Site
Do not install the equipment in potentially explosive environment.
Electrical
DANGER: RISK OF ELECTROCUTION

Turn OFF all power supply before connecting electric wiring or touching electric parts.

Disconnect the power supply for more than 1 minute and measure the voltage at the terminals of main
circuit capacitors or electrical components before servicing. The voltage must be less than 50 V DC before you
can touch electrical components. For the location of the terminals refer the wiring diagram.

Do NOT touch electrical components with wet hands.

Do NOT leave the equipment unattended when the service cover is removed.
WARNING
A main switch or other means for disconnection, having a contact separation in all poles providing full
disconnection under overvoltage category III condition, shall be installed in the fixed wiring.
WARNING

Only use copper wires.

Make sure the field wiring complies with the applicable legislation. Do NOT touch electrical components
with wet hands.

All field wiring must be performed in accordance with the wiring diagram supplied with the product.

Make sure to install earth wiring. Do NOT earth the unit to a utility pipe, surge absorber, or telephone
earth. Incomplete earth may cause electrical shock.

Make sure to use a dedicated power circuit. NEVER use a power supply shared by another appliance.

Make sure to install the required fuses or circuit breakers.

Make sure to install an earth leakage protector. Failure to do so may cause electric shock or fire.
*Note: Install the wires at least 1 meter away from televisions or radios to prevent interference. Depending on the radio waves, a distance of 1 meter may not be sufficient.
4 201807