Netopia 4741 Status Lights - Netopia 4741 2A4NA Administration Manual

Netopia 4741 Status Lights

The figure below represents the Netopia 4741 status light (LED) panel.
Netopia 4741 LED front panel
The following table summarizes the meaning of the various LED states and colors:
When this happens...
The power is off (button is not pressed in)
The power is on (button pressed in)
No errors are detected on any interface
Errors are detected by the system
The Ethernet interface is connected
The Ethernet interface is not connected
The DSL WAN interface is inactive
The DSL WAN interface is training
The DSL WAN interface is trained
A phone is off-hook
A phone is on-hook
Making the Physical Connections 2-5
1 is dark.
1 is green.
2 is dark.
2 is red.
3 is green.
3 is dark.
4 is dark.
4 flashes green. Initially the LED is dark, then flashes
green while attempting to establish connection to the
DSLAM. While exchanging connection information with the
DSLAM, the LED flashes slightly faster.
4 is solid green.
5 through 8 are green for the corresponding extension.
5 through 8 are dark for the corresponding extension.
Voice
the LEDs...