Table of Contents
Advertisement
This chapter describes the telephony services and configuration of the Netopia 4741 ADSL Integrated Access
Device. For specific details on configuration and use of the Netopia 4741's Internet connection, refer to
6, "Easy Setup"
and
Chapter 8, "WAN and System Configuration."
This chapter covers the following topics:
"Introduction" on page 7-1
"Configuring the Voice Features" on page 7-2
The Netopia 4741 provides small and medium sized businesses with a complete Centrex PBX system. It
supports voice call switching between the ADSL link and four local extensions. Call management features can
include distinctive ringing, intelligent call forwarding, Direct Inward Dial (DID), Caller ID, and hunt groups.
Important key system features such as call hold, call transfer, and call waiting are all supported.
Note: Since the Netopia 4741 is a Centrex-based IAD, specific voice features available to you via the Netopia
4741 will depend on the services for which you contract with your service provider.
The Netopia 4741 supports up to four telephone extensions. Like the rest of the 4700-series line, the Netopia
4741 includes the Netopia data routing engine for any number of attached computers or other network devices
connected to a single 10/100 Ethernet port.
Key features include:
Fax/Modem: Configurable Voice port for incoming fax or modem calls. Echo cancellation and other items
are changed when a fax is auto detected.
Voice Gateway Interoperability: CopperCom, JetStream, Tollbridge TDSoft, Zhone. General Bandwidth
support to follow in an upcoming firmware release.
Voice Configuration 7-1
Chapter
Advertisement
Table of Contents
