Quick Easy Setup Connection Path - Netopia 4741 2A4NA Administration Manual

Quick Easy Setup Connection Path

This section may be all you need to do to configure your Netopia 4741 ADSL Integrated Access Device. Your
service provider will supply you with several parameter values. Below is a handy checklist:
Data Link Encapsulation
Data Circuit VPI
Data Circuit VPI
Voice Gateway:
Address Translation
Enabled:
IP Addressing:
(for PPP DLEs only)
PPP Authentication:
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name
Server:
Secondary Domain Name
Server:
Default IP Gateway:
Write Access Name:
Write Access Password:
DSL Line Configuration Screen
RFC1483 (default)
or
PPP
0-255 (0 is default)
0-65535 (35 is default)
Voice Easy Setup Screen
CopperCom,
JetStream,
TollBridge,
TDSoft
Zhone
Easy Setup Profile Screen
Yes (default) or
No
Numbered (default) or
Unnumbered
None (default),
PAP or
CHAP
IP Easy Setup Screen
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
Easy Setup Security Configuration Screen
_______________________
_______________________
RFC1483 Mode:
Bridged 1483 (default) or
Routed 1483
PPP Mode:
VC Multiplexed (default) or
LLC SNAP
_______________________
_______________________
(for any Voice Gateway other
than TollBridge)
Voice VPI:
Voice VCI:
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Easy Setup 6-3
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
Off (default) or
On
0-255 (0 is default)
_______________________
0-65535 (0 is default)
_______________________
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________