Table of Contents
Advertisement
Follow these steps to change a parameter's value:
1.
Select the parameter you want to change.
2.
Select a new value for the parameter. Return to step 1 if you want to configure another parameter.
3.
Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure many of the data routing features of your network by means
of a standard Simple Network Management Protocol (SNMP) agent.
Details are given in
Security
These screens allow you to add users and define passwords on your network.
Details are given in
Upgrade feature set
You can upgrade your Netopia 4741 by adding new feature sets through the Upgrade Feature Set utility.
See the release notes that came with your device or feature set upgrade, or visit the Netopia Web site at
www.netopia.com for information on new feature sets, how to obtain them, and how to install them on your
Netopia 4741.
Logging
You can configure a UNIX-compatible syslog client to report a number of subsets of the events entered in the
device's WAN Event History. See
The Syslog client (for the PC only) is supplied as a .ZIP file on the Netopia CD.
Select Logging from the System Configuration menu.
"SNMP" on page
13-13.
"Security" on page
12-1.
"WAN Event History" on page
WAN and System Configuration 8-25
13-5.
Advertisement
Table of Contents
