Netopia 4753 Status Lights - Netopia 4753 2A4NA Administration Manual

Netopia 4753 Status Lights

The figure below represents the Netopia 4753 status light (LED) panel.
Netopia 4753 LED front panel
The following table summarizes the meaning of the various LED states and colors:
When this happens...
The power is off (button is not pressed in)
The power is on (button pressed in)
No errors are detected on any interface
Errors are detected on any interface
The Ethernet interface is operational
The Ethernet interface is disabled
The DSL WAN interface is inactive
The DSL WAN interface is training
The DSL WAN interface is trained
A phone is off-hook
A phone is on-hook
Making the Physical Connections 3-5
Voice
1 is dark.
1 is green.
2 is dark.
2 is red.
3 is green.
3 is dark.
4 is dark.
4 flashes green. Initially the LED is dark, then flashes
green while attempting to establish connection to the
DSLAM. While exchanging connection information with the
DSLAM, the LED flashes slightly faster.
4 is solid green.
5 through 12 are green for the corresponding extension.
5 through 12 are dark for the corresponding extension.
the LEDs...