Table of Contents
Advertisement
6-4 Administration Guide
You can record these values by printing the checklist above. Refer to it as you navigate through the Easy Setup
screens.
If your provider assigns your device a Static IP address, do the following:
1.
Open a Telnet session to 192.168.1.1 to bring up the Main Menu.
If you don't know how to do this, see
Alternatively, you can connect the console cable and open a direct serial console connection, using a
terminal emulator program. See
The Main Menu appears.
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
"Connecting through a Telnet Session" on page
"Connecting a Console Cable to Your Device" on page
Netopia 4741 v5.1.1
Easy Setup...
WAN Configuration...
System Configuration...
POTS Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
5-2.
5-3.
Advertisement
Table of Contents
