Netopia 4752 Status Lights - Netopia 4752 2A4NA Administration Manual

3-4 Administration Guide

Netopia 4752 Status Lights

The figure below represents the Netopia 4752 status light (LED) panel.
Netopia 4752 LED front panel
The following table summarizes the meaning of the various LED states and colors:
When this happens...
The power is off (button is not pressed in)
The power is on (button pressed in)
The power-on self-test fails
The WAN interface is training
The WAN interface is operational
Data is transmitted or received
No traffic is being transmitted or received
Voice is operational
Voice traffic is transmitted or received
The Ethernet interface is connected at 10Base-T speed
The Ethernet interface is connected at 100Base-T speed
The Ethernet hub has no link
The Ethernet hub has link
SDSL Traffic Ethernet
the LEDs...
1 is dark.
1 is green.
1 is red.
3 flashes red; then flashes green.
3 is green.
4 flashes yellow.
4 is dark.
5 is green.
5 is yellow.
6 is dark.
6 is green.
7 is dark.
7 is green.