Table of Contents
Advertisement
Roll Up Sides (Optional)
1. Drive 1/2 x 2' EMT into the ground 2' from the house on the x to help secure the
3/4 hand crank guide rod. (One for each side)
NOTE: Instructions in the hand crank box ask you to put the crank less than 2', however we have
had better performance 2' away from the building.
2. Place 3/4 x 5' EMT on the 1/2" and gently drive into the ground until the top
reaches your hip board height.
3. Connect your EMT pieces together and secure at each connection point with a
#8 self tap screw.
4. Place your snap clamps next to your long EMT sections to use during the
covering process.
5. Following instructions in the box install the hand crank on 3/4 EMT.
Scan QR for info on
Rollup Sides or
visit
https://youtu.be/zdlP_L-fAYg
Need Help?
contact@bootstrapfarmer.com
Page 43
www.bootstrapfarmer.com
Advertisement
Table of Contents
