Connect and Install Hoops
● Piece your hoop set together on a flat surface. For consistency, assemble all your
hoops in the same spot, so they match.
● Using a #8 self tap screw, connect the hoop together to prevent twisting and
separation. Screwing straight down while the hoop is lying flat will ensure the
screw is parallel to the ground once you raise the hoop.
● When all of the hoops are connected, place them near the ground posts.
● With a partner, stand the hoops up and place one side into a ground post and
then the other. For consistency, have the same person go first. At this point do
not force the hoops down into the ground posts all the way. Adjustments will
come on the next couple of steps.
Scan QR for info on Setting Hoops or
visit
https://youtu.be/eXq7C5LAeVQ
Need Help?
contact@bootstrapfarmer.com
Page 15
www.bootstrapfarmer.com