Double Layer Inflation Kit (Optional) - Bootstrap Farmer 14 Hoop House Instruction & Owner's Manual

Double Layer Inflation Kit (Optional)

We recommend pulling outside fresh air with the inflation fan. If you draw the air from
inside of the hoop house itself to inflate your double layers, all of that excess moisture
from the humidity will end up between your plastic layers.
Step 1: Attach the Mounting Bracket and Fan
1. Attach bracket to first hoop (not endwall) on the inside of the structure.
2. Gently cut out film from the center of the hole.
3. Place the plastic dome from the outside into the bracket and turn to the right
4. Install fan onto bolt studs with nuts.
Wiring Notes
● Add a three-prong cord long enough to reach the nearest 110v outlet with a
GFCI.
● Wired directly to an outlet box
**Refer to local building codes and consult a licensed electrician if in doubt about
electrical work.
Need Help? contact@bootstrapfarmer.com
Page 50
www.bootstrapfarmer.com