Table of Contents
Advertisement
Greenhouse Plastic
Your kit will come with two pieces of plastic. The larger one will be used to cover the top
of your structure and the smaller one will be used to cover the endwalls.
Make sure you can finish securing the plastic before you stop for the day, so it doesn't
blow away on you. Roll the plastic out and drape over the length of the greenhouse.
Ensure there is an equal amount of plastic that overhangs both ends.
Installing plastic can be the most intimidating part of your build but once you get going
you will find it to be pretty straight forward. Having 2-4 people will make the job go faster
and easier. Pick a time when there is little or no wind to interfere with installation. Keep
a rounded broom handle or painter's pole handy to help gently push the plastic over
hoops in the middle. Grab your friends and step ladders and let's go folks!
*
*This label should be on the inside of your structure.
Before you begin, look
for sharp edges on cut pieces of lock channel and file
them down. Make sure that all tension bands and cross connectors are tight and
not sticking up, where they could possibly snag the plastic.
Need Help?
contact@bootstrapfarmer.com
www.bootstrapfarmer.com
Page 40
Advertisement
Table of Contents
