Step 2: Installing Hose Hook Up to Motor
1. Remove Baffle Cover
2. Install Metal Ring to Motor with #8 Self Tap Screws. Note the New Baffle position.
3. Adjust screw tightness to open/close the new baffle. Not too tight.
4. Hole 1 is the original baffle cover hole. Hole 2 is where the ring spacing will be.
Note, this IS NOT where the mounting will occur. This is just an example of how
far to space the ring so the screws do not interfere with the squirrel cage inside.
See picture 4.
5. Location of correctly spaced self-tap screws.
6. Once the motor is installed inside of the house, in the previously installed
bracket, insert hose tips into the bracket and twist.
Need Help?
contact@bootstrapfarmer.com
Page 51
www.bootstrapfarmer.com