Bootstrap Farmer 14 Hoop House Instruction & Owner's Manual page 52

Step 3: Installing Hose to Endwall Flange
1. Sandwich Flange Plate (on the inside) and Flat Plate (on the outside) between
the end wall film in line with the mounted fan on the next hoop from the end wall.
Secure with #8 self-tap screws.
2. Gently cut plastic from the hole.
3. Attach the air hose from the motor to the endwall flange and twist.
Step 4: Installing the Second Layer of Plastic
Install the Inflation Blowers before installing the 2nd layer of greenhouse plastic.
Double layer greenhouse film is put on exactly like the first layer. The only thing to keep
in mind is the double layer is inflating only from end wall to end wall and hip brace to hip
brace. The spring wire will fit into the end wall hoops that already have the two springs
and two layers that make up the 1st film piece and end wall piece.
Note: When first inflating your double layer start with the baffle wide open and
adjust if necessary.
Need Help? contact@bootstrapfarmer.com
Page 52
www.bootstrapfarmer.com