Table of Contents
Advertisement
End Walls
Pictures on the next page.
Tools
● Ladder
● Mason Line
● Drill
● Ground Post Driver
● Bubble Level
● Tape Measure
● Clamp
Parts
● Ground Post
● Lock Channel
● Ridge Pole
● Endwall Hardware Kit
● 1 ⅜ Tension Bands
Installation of End Wall
1. Run a mason line across the end hoop on the outside of the building.
2. Center door frame in the middle of the hoop.
3. Install ground post inside of line and immediately to the left and right of door
frame - 2' in ground / 2' above.
4. For 20' houses, center additional vertical supports 1/2 way between hoop and
door and install ground posts.
5. Attach hat channel as base board with #10 self tap screws level along ground to
all ground posts - cut off excess. There will be no baseboard across where the
door frame is to be installed in the next section.
Need Help?
contact@bootstrapfarmer.com
Page 23
www.bootstrapfarmer.com
Advertisement
Table of Contents
