Table of Contents
Advertisement
Trellis Bar Layout
1. 20' endwall hoop
2. Trellis bar joiner
3. 78" ridgepole
4. Optional purlin
5. Horizontal trellis bar
Wire Trellis Kit (Optional)
Upon receiving your kit, get started by checking your parts list. If anything is missing,
reach out to our customer service department for assistance.
Determining Trellis Wire Row Spacing
Trellis can be placed anywhere beds are required along the width of the hoop house.
Once the center of the rows is determined, drill a ⅜" hole through the face of the Trellis
Bar along the center of the bar through both side walls.
*If your ⅜" drill bit is over 3" long, use a backer board to avoid puncturing your
greenhouse plastic.
*Repeat for each row and again on the opposite end wall.*
Need Help?
contact@bootstrapfarmer.com
Included Parts for Each Row
9" Turnbuckle (2)
1.
Quick link (2)
2.
⅜" x 4" Eye bolts with nut
3.
& washer (2)
¼" 7x19 CABLE 304
4.
Galvanized SS pre-cut to your
specified length. (barrel crimp
on one end)
¼" Wire Crimps (2)
5.
Page 48
www.bootstrapfarmer.com
Advertisement
Table of Contents
