6. A. Insert ridge poles into newly installed ground posts (with swage facing up).
B. Insert 36''ridge pole extender onto ridge pole (door uprights only) and secure
with #8 self tapping screw, through the side of the swaged connection.
7. Install a tension band over the endwall hoop. Slide ridge pole up to bottom of
hoop and secure with a with a #10 self tap through the tension band. (Pre-drill a
pilot hole in the end of the vertical pole for ease of attachment)
Scan QR for info on
Building End Walls or
visit
https://youtu.be/zJ34EQjeBMU
Need Help?
contact@bootstrapfarmer.com
Page 24
www.bootstrapfarmer.com